RH924WA 光纤网络适配器

描述

RH924WA 光纤网络适配器

概述
这些标准的200系列底板支持小型和大型系统的分布式控制，并特别支持以下Foxboro Evo™系统模块:

现场控制处理器280 (FCP280)容错或非容错
现场设备控制器280 (FDC280)容错或非容错
现场控制处理器270 (FCP270)容错或非容错
现场通信模块(FCM100Et和fcm100e)和其他fcm
现场总线扩展模块(FEM100E)
现场总线隔离器/滤波模块(FBI200/FBI100)
标准现场总线模块(fbm)和100系列fbm连接。

支持标准fbm的200系列基板通过提供2、4和8个fbm位置的单位增量，结合垂直和水平安装，实现了整体系统安装功能。

特性200系列底板的特点是:
对于支持fbm的底板:
•2、4和8个模块位置与垂直和水平安装相结合
•用于I/O终止组件的现场连接，每个模块的冗余适配器和模块标识符
•拨码开关，用于识别某些模块底板
•添加额外的200系列底板，而无需将系统从服务中移除(需要冗余总线)

RH924WA

RH924WA 光纤网络适配器

OVERVIEW
These standard 200 Series baseplates supportdistributed control for both small and large systemsand specifically support the following Foxboro Evo™system modules:

Field Control Processor 280 (FCP280) faulttolerant or non-fault-tolerant
 Field Device Controller 280 (FDC280) faulttolerant or non-fault-tolerant
 Field Control Processor 270 (FCP270) faulttolerant or non-fault-tolerant
 Field Communications Modules (FCM100Et andFCM100E) and other FCMs
 Fieldbus Expansion Modules (FEM100E)
 Fieldbus Isolator/Filter Modules (FBI200/FBI100)
 Standard Fieldbus Modules (FBMs) and100 Series FBMs connection.

The standard FBM-supporting 200 Series baseplatesenable overall system installation functionality byproviding unit increments of 2, 4, and 8 FBMpositions in combination with vertical and horizontalmounting.

FEATURESKey
features of the 200 Series baseplates are:
 For FBM-supporting baseplates:
• 2, 4, and 8 module positions in combinationwith vertical and horizontal mounting
• Field connection for I/O terminationassemblies, redundant adapters and moduleidentifiers for each module
• DIP switch for identification of certainModular Baseplates
• Adding additional 200 Series baseplateswithout removing the system from service(requires redundant bus)