MVI56-MBP Modbus Plus通讯模块

描述

MVI56-MBP Modbus Plus通讯模块

MVI56-MBP是PROSOFT公司推出的一款Modbus Plus通讯模块。该模块专为与Modbus Plus网络连接而设计，具备高度的可靠性和稳定性，适用于长时间稳定工作的场景。

在安装和配置方面，MVI56-MBP模块需要被安装到控制器的扩展插槽中，并配置相应的IP地址和Modbus Plus网络地址。此外，还需要配置模块的通信参数，如波特率、校验等，以确保模块能够与其他设备进行顺畅的通信。

在实际使用中，用户需要将Modbus Plus网络电缆连接到模块的端口，并将控制器与Modbus Plus网络连接。在控制器程序中，用户可以使用Modbus Plus函数块来读写Modbus Plus网络上的设备数据。

MVI56-MBP Modbus Plus通讯模块

The MVI56-MBP is a Modbus Plus communication module from PROSOFT. The module is designed for connection to the Modbus Plus network, with a high degree of reliability and stability, suitable for long-term stable operation scenarios.

In terms of installation and configuration, the MVI56-MBP module needs to be installed into the expansion slot of the controller and configured with the corresponding IP address and Modbus Plus network address. In addition, it is also necessary to configure the communication parameters of the module, such as baud rate, verification, etc., to ensure that the module can communicate smoothly with other devices.

In practical use, the user will need to connect the Modbus Plus network cable to the port of the module and connect the controller to the Modbus Plus network. In the controller program, users can use the Modbus Plus function block to read and write device data on the Modbus Plus network.