IS200AEPAH1BKE IS215WEPAH2BB Mark VI Speedtronic系列印刷元器件

描述

IS200AEPAH1BKE IS215WEPAH2BB Mark VI Speedtronic系列印刷元器件

功能缩写:AEPA
制造商:ge工业系统，美国通用电气公司
金属氧化物压敏电阻数量:六个
型号:IS200AEPAH1BKE
插头连接器数量:19个
继电器数量:12
系列:Mark VI IS200
重量:2磅

产品描述
IS200AEPAH1BKE印刷电路板是通用电气(General electric) Mark VI Speedtronic系列印刷元器件中的一员，在工业界通常以其独特的功能缩写来指代;AEPA。这款AEPA电路板被认为是修订版或更新版，因为它的功能修订版1值为B，功能修订版2值为K，美工修订版值为e。在决定购买这款IS200型号之前，请仔细考虑每个修订版，因为它们可能会对兼容性或安装规格产生很大的影响。

硬件须知和规格
IS200AEPAH1BKE型号为印刷电路板。当AEPA板被建造时，它是与一个可选的辅助板一起建造的。可选的辅助板将用螺钉插入到AEPA的支架上。如果辅助板通过左上角的两个连接器连接到主模块上。两个连接器为公连接器。有许多集成电路包括但不限于三针母插头和两个母插头。

AEPA模块可以与三模块或单冗余类型一起使用。IS200AEPAH1BKE PCB采用三模冗余架构时，需要使用三个独立的控制模块、ionet和电源。TMR架构还允许通过电子器件内的单点故障，并且可以在过程运行时修复模块或有缺陷的卡。

IS200AEPAH1BKE IS215WEPAH2BB

IS200AEPAH1BKE IS215WEPAH2BB Mark VI Speedtronic系列印刷元器件

Functional Acronym/Abbreviation ：AEPA
Manufacturer： GE Industrial Systems, General Electric Company US
Metal Oxide Varistors Quantity ：Six
Model Number ：IS200AEPAH1BKE
Number of Plug Connectors ：19
Relay Quantity ：12
Series ：Mark VI IS200
Weight：2 lbs

Product Description
A printed circuit board existing as a member of General Electrics’ Mark VI Speedtronic series of printed component parts, the IS200AEPAH1BKE printed circuit board is usually referred to in industry circles by its distinctive functional acronym; AEPA. This particular model of AEPA circuit board is considered a revised or updated version, as it carries a functional revision 1 value of B, a functional revision 2 value of K, and an artwork revision value of E. Before deciding to make a purchase of this IS200 model, please consider each revision version carefully, as they may impact compatibility or installation specifications greatly.

Hardware Tips and Specifications
The IS200AEPAH1BKE model is a printed circuit board. When the AEPA board was being built it was built with an optional auxiliary board. The optional auxiliary board will be inserted with screws into standoffs on the AEPA. If the auxiliary board is connected to the main module with the two connectors in the upper left-hand corner. The two connectors are male connectors. There is a multitude of integrated circuits which include but are not limited to a three-pin female connector, and two female phone plugs.

The AEPA module can be used with triple modular or simplex redundancy types. If used with triple modular redundancy type architecture, the IS200AEPAH1BKE PCB necessitates the use of three separate and independent control modules, IONets, and power supplies. The TMR architecture also allows for the riding through of a single-point failure within the electronics and can repair the module or defective card while the process is running.