8440-1868 CONTROL-DTSC-200-55B

描述

8440-1868 CONTROL-DTSC-200-55B

DTSC-200是新ATS(自动转换开关)构建和改造的终极控制。一个完整的测量和保护包，它可以很容易地配置为公用事业对发电机，发电机对发电机，或公用事业对公用事业系统的开放，

伍德沃德的DTSC-200是新ATS(自动转换开关)构建和改造的终极控制。一个完整的测量和保护包，它可以很容易地配置为公用事业到发电机，发电机到发电机，或公用事业到公用事业系统的开放，延迟，或封闭过渡转移与同步检查，以确保最顺利的转移。

高端功能，如传输抑制、源优先级选择、负载卸载、电机负载断开、电梯预信号和发动机运动定时器，都是这款功能齐全、成本效益高的控制系统的标准配置。

特点:
可配置为打开，延迟和关闭转换传输
可配置的效用到发电，发电机到发电机，和效用到效用应用程序
封闭过渡传输可以在< 100ms的时间内完成
同相监控(同步检查)
负载/无负载测试功能
发动机锻练(负荷/空载试验)程序，间隔完全可调
调峰方式
甩负荷
延长并行时间(对于耗时超过100ms的封闭转换传输)
禁止传输和/或重新传输
源优先级选择
电梯预转移和电机负载断开定时器
带有实时时钟的事件/警报日志系统
内部断路器联锁利用离散输入断路器位置检测
可自由配置的离散I/O，支持外部I/O扩展单元(例如Woodward ikd1)
RS-232, RS-485和CAN总线接口，用于远程控制和可视化目的
支持CANopen和Modbus RTU协议
PC和/或前显示配置
128×64像素图形LCD显示
LogicsManager提供可编程逻辑功能，消除继电器逻辑或PLC
真实有效值电压，电流和功率传感
用于电源可用性和断路器状态的led

8440-1868

8440-1868 CONTROL-DTSC-200-55B

The DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open,

Woodward’s DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open, delayed, or closed-transition transfer with synch-check to ensure the smoothest possible transfer.

High-end features like transfer inhibit, source priority selection, load shed, motor load disconnect, elevator pre-signal, and engine exerciser timers come standard in this incredibly versatile, cost-effective control.

Features:
Configurable for open, delayed, and closed transition transfer
Configurable for Utility-to-Gen, Generator-to-Generator, and Utility-to-Utility applications
Closed transition transfers can be accomplished in times < 100ms
In-phase monitoring (sync-check)
Load/no load test functionality
Engine exerciser (load/no load test) routine with fully adjustable interval
Peak shaving mode
Load shedding
Extended parallel time (for closed transition transfers that take longer than 100ms)
Transfer and/or re-transfer inhibit
Source priority selection
Elevator pre-transfer and motor load disconnect timers
Event/Alarm log system with real time clock
Internal breaker interlock utilizing discrete inputs for breaker position detection
Freely configurable discrete I/O with support for external I/O expansion units (e.g. Woodward IKD 1)
RS-232, RS-485 and CAN bus interfaces for remote control and visualization purposes
Supports CANopen and Modbus RTU protocols
PC and/or front display configuration
128×64 pixels graphic LCD display
LogicsManager provides programmable logic functions that eliminate relay logic or PLC`s
True RMS voltage, current and power sensing
LEDs for source availability and breaker status