330016-12-01-01-00-00-00 XY/Gap双振动监测器

描述

330016-12-01-01-00-00-00 XY/Gap双振动监测器

艾伦-布拉德利2711P-RN16是一种可选通信适配器。该适配器安装在现有逻辑模块的顶部，支持数据高速公路+ (DH+)，远程I/O (RIO)和DH-485网络连接。它兼容使用PanelView Plus / PanelView Plus CE和PanelView Plus 6图形操作终端。具体来说，它只能安装在屏幕尺寸为7英寸至15英寸或700至1500范围的操作终端上。当与PanelView Plus 6一起使用时，仅支持数据高速公路Plus (DH+)和DH485，因为PanelView Plus 6不支持本机远程I/O通信，即使使用2711P-RN6通信模块。另外，2711P-RN6不兼容PanelView Plus 7图形操作终端。

2711P-RN6具有1个DH485端口和1个DH+ / RIO通信端口。两个端口都是凤凰连接器，DH485有6个引脚，DH+ / RIO有3个连接引脚。此外，该通信适配器有两(2)个LED状态指示灯，熄灭时表示通道未在线，绿色闪烁时表示设备仅在网络上有节点，绿色常亮时表示设备在线并接收令牌，红色闪烁时表示DH-485:重复节点/ DH+:奇偶校验错误，红色常亮时表示自检失败。

DH+和RIO网络支持多节点通信，可以覆盖很长的距离。这些通信协议支持菊花链拓扑结构和快速的数据传输速率。它需要使用1770-CD或Belden Blue Hose电缆。对于DH-485通信，它还支持菊花链拓扑，需要使用Belden #3106A或#9842。

该模块提供指示灯，用于显示DH-485或DH+网络连接状态。在DH-485网络上，控制器可以向网络上的其他控制器发送和接收消息。艾伦-布拉德利2711P-RN6确实支持远程编程和监控。请记住，通过DH-485连接的过多流量可能会影响性能，并导致时间和效率的损失。Allen-Bradley 2711P-RN6网络将信息从一个设备发送到另一个设备。该模块监控进程状态和设备状态。它支持数据采集和监控、程序上传和下载以及监督控制。该模块的最大网络长度为4000英尺。该模块一次最多可连接32台设备。该模块还可以在不中断网络的情况下添加和删除节点。控制DH-485网络上消息传输的协议支持2类设备:发起者和响应者。在包装为零之前，启动器将寻找的最大地址数是最大可配置节点地址处的值。所有启动器和响应器的缺省值为31。2711P-RN6的网络中至少存在1个启动器。2711P-RN6的货运重量为3磅，货运尺寸为11 × 8 × 6英寸。

330016-12-01-01-00-00-00

330016-12-01-01-00-00-00 XY/Gap双振动监测器

The Allen-Bradley 2711P-RN16 is an optional communication adapter. This adapter is installed on top of an existing Logic module, enabling Data Highway Plus (DH+), Remote I/O (RIO) and DH-485 network connectivity. It is compatible for use with PanelView Plus / PanelView Plus CE and PanelView Plus 6 graphic operator terminals. Specifically, it may only be installed with operator terminals having screen size of 7-inch to 15-inch or 700 to 1500 range. When used with PanelView Plus 6, only Data Highway Plus (DH+) and DH485 is supported as the PanelView Plus 6 does not support native Remote I/O communications, even with a 2711P-RN6 communication module. Additionally, the 2711P-RN6 is not compatible with PanelView Plus 7 graphic operator terminals.

The 2711P-RN6 comes with One (1) DH485 port and One (1) DH+ / RIO communication ports. Both ports are phoenix connectors with the DH485 having 6 pins and DH+ / RIO having 3 connection pins. Additionally, this communication adapter has Two (2) LED status indicators that indicate Channel is not online when OFF, Device is only node on the network when Blinking green, Device is online and receiving token when Solid green, DH-485: Duplicate node / DH+: Parity error when Blinking red and Failed self-test when Solid red.

The DH+ and RIO network supports multi-node communication and may cover long distances. These communication protocol supports daisy-chain topology and fast data transmission rate. It requires use of the 1770-CD or the Belden Blue Hose cable. For DH-485 communication, it also support daisy chain topology and requires use of Belden #3106A or #9842.

This module has indicators that show the status of the DH-485 or the DH+ network connections. On the DH-485 network, the controller can send and receive messages to and from other controllers on the network. The Allen-Bradley 2711P-RN6 does support remote programming and monitoring. Keep in mind that excessive traffic through a DH-485 connection may affect performance and result in loss of time and efficiency. The Allen-Bradley 2711P-RN6 network sends information from 1 device to another. This module monitors process status and device status. It supports data acquisition and monitoring, program uploading and downloading, and supervisory controls. The maximum network length for this module is 4000 feet. This module can connect with up to 32 devices at a time. This module can also add and remove nodes without disrupting the network. The protocol that controls the transfer of messages on the DH-485 network supports 2 classes of devices: initiators and responders. The maximum number of addresses that the initiators will seek before wrapping to zero is the value at the maximum configurable node address. The default value for is 31 for all the initiators and responders. The 2711P-RN6 must have at least 1 initiator on its network. The shipping weight of the 2711P-RN6 is 3 pounds and the shipping dimensions are 11 x 8 x 6 inches.