1756-IF16 Allen-Bradey 模拟量输入模块

 ControlLogix控制器带有大量的内存,可寻址大量的I/O点。
控制器既可控制本地I/O,又可通过Ethernet/IP、ControlNet、
DeviceNet以及通用远程I/O网络来控制远程I/O。
可用的用户内存:750K字节或15M字节或35M字节,zui大可达8M
zui大数字量I/O点数:128000点  zui大模拟量I/O点数:4000点
程序扫描时间:≤006ms/1k   所有模块不需要冷却风扇
在同一机架中可多处理器并存,实现分布式运算。

分类:
  • 购买咨询热线/Phone:18059809136
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层

描述

1756-IF16 Allen-Bradey 模拟量输入模块

756-IF16规格参数

品牌:Allen-Bradey  ROCKWELL

产地:美国

规格:模拟量输入模块

一、*处理器单元(CPU)
ControlLogix控制器带有大量的内存,可寻址大量的I/O点。
控制器既可控制本地I/O,又可通过Ethernet/IP、ControlNet、
DeviceNet以及通用远程I/O网络来控制远程I/O。
可用的用户内存:750K字节或15M字节或35M字节,zui大可达8M
zui大数字量I/O点数:128000点  zui大模拟量I/O点数:4000点
程序扫描时间:≤006ms/1k   所有模块不需要冷却风扇
在同一机架中可多处理器并存,实现分布式运算。
即可随意安放处理器模块、输入输出模块和通信模块,
而没有任何的数量、位置和类型限制。  用户无需更换处理器,
通过替换更大容量的内存即可扩充系统处理能力。
具有RUN运行模式、PROGRAM编程模式、REMOTE远程模式的钥匙开关。
CPU自带一节锂电池,掉电后程序至少可保存63天。
用户程序、I/O数据或系统参数能够以文件形式存放于数据存储卡(需另配)或CPU内存中。
基站和扩展I/O的框架采用同系列规格的框架,所有的I/O模块采用和CPU对应同一系列的模块。
所有的I/O模块的配置及编制通过软件实现,无跳线及DIP开关;且每个槽位都是通用的,即模块不存在对槽位的依赖。
具有可直接插入机架的以太网、控制网、设备网模块,支持以太网、控制总线、设备总线,并支持多网配置,而且不需要处理器进行干预。

1756-IF16 Allen-Bradey 模拟量输入模块

756-IF16 Specifications

Brand: Allen-Bradey ROCKWELL

Origin: USA

Specification: analog input module

1. * Processor unit (CPU)
The ControlLogix controller comes with a large amount of memory and can address a large number of I/O points.
The controller can control both local I/O and Ethernet/IP, ControlNet,
DeviceNet and universal Remote I/O network to control remote I/O.
Available user memory: 750K bytes or 15M bytes or 35M bytes, up to 8M
Maximum digital I/O points: 128000 Maximum analog I/O points: 4000 points
Program scan time: ≤006ms/1k All modules do not require cooling fans
Multiple processors can coexist in the same rack to achieve distributed computing.
The processor module, input/output module and communication module can be placed at will.
There are no restrictions on quantity, location or type. Users do not need to change the processor,
System processing capacity can be expanded by replacing larger memory capacity.
It has the key switch of RUN mode, PROGRAM mode and REMOTE mode.
The CPU comes with a lithium battery, and the program can be stored for at least 63 days after power failure.
User programs, I/O data, or system parameters can be stored as files on a data memory card (required separately) or in CPU memory.
Base station and expansion I/O framework adopts the same series of specifications of the framework, and all I/O modules use the same series of modules corresponding to the CPU.
All I/O modules are configured and programmed through software, without jumper and DIP switch; Each slot is universal, that is, the module does not depend on the slot.
It has Ethernet, control network, device network modules that can be directly inserted into the rack, supporting Ethernet, control bus, device bus, and supporting multi-network configuration, and does not require processor intervention.

  • 购买咨询热线/Phone:18059809136
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层