促销中

ABB REX521GHHPSH51G | 变频器

原价为:¥890,000。当前价格为:¥98,000。

品牌:ABB
产品型号:REX521GHHPSH51G
质保:1年
状态:全新/二手
尺寸:150mm* 400mm*300mm
重量:10kg
原产地:瑞典
库存: 现货/期货
交货时间:付款后3天内发货/付款后1个月内发货
邮箱:www.ygdcs.com
购买咨询热线 /Whatsapp:18859254943

分类:

描述

ABB REX521GHHPSH51G | 变频器

I. Core Functions
一、核心功能

1. Advanced vector control technology
1. 高级矢量控制技术

Full closed-loop vector control (FVC
全闭环矢量控制(FVC)

The precise control of motor torque, speed and position is achieved through encoder feedback (incremental/absolute), with a dynamic response time of ≤10ms and steady-state accuracy of ±0.01% (speed) and ±0.5% (torque).
通过 编码器反馈(增量式/绝对式) 实现 电机转矩、速度、位置的精确控制,动态响应时间 ≤10ms,稳态精度 ±0.01%(速度)、±0.5%(转矩)。

Sensorless vector control (SVC) for asynchronous motors (IM) and permanent magnet synchronous motors (PMSM) enables high-precision speed regulation (accuracy ±0.5%) without the need for encoders.
支持 异步电机(IM)和永磁同步电机(PMSM) 的无传感器矢量控制(SVC),无需编码器即可实现 高精度调速(精度 ±0.5%)。

Dynamic Torque Control (DTC
动态转矩控制(DTC)

ABB’s patented technology directly controls the motor flux and torque, bypassing the PWM modulation stage to achieve a rapid response with zero overplay and zero oscillation (response time ≤2ms), and is suitable for impact loads (such as crushers and presses).
ABB专利技术,直接控制 电机磁通和转矩,跳过 PWM调制环节,实现 零超调、零振荡 的快速响应(响应时间 ≤2ms),适用于 冲击负载(如破碎机、压机)。

Multi-motor cooperative control
多电机协同控制

Supports Master-Follower control, synchronizing the output frequencies and phases of multiple frequency converters through optical fibers or CAN buses to achieve synchronous operation of multiple motors (such as paper machines, rolling mills).
支持 主从控制(Master-Follower),通过 光纤或CAN总线 同步 多台变频器 的输出频率和相位,实现 多电机同步运行(如 造纸机、轧机)。

It offers Electronic Gearing and Cam Profile functions, supporting nonlinear synchronous control (such as flying shears and chasing shears).
提供 电子齿轮(Electronic Gearing) 和 凸轮功能(Cam Profile),支持 非线性同步控制(如 飞剪、追剪)。

2. Efficient energy management
2. 高效能源管理

Energy feedback function
能量回馈功能

Integrating active front-end (AFE) technology, the regenerative energy generated during motor deceleration is fed back to the power grid, achieving an energy-saving rate of ≥30%. It is suitable for frequently start-stop loads (such as cranes and elevators).
集成 有源前端(AFE) 技术,将 电机减速时的再生能量 回馈至电网,节能率 ≥30%,适用于 频繁启停的负载(如 起重机、电梯)。

Intelligent sleep mode
智能休眠模式

Automatically adjust the output power according to the load demand, reduce the operating frequency or enter a sleep state when the load is light or no, and further reduce energy consumption.
根据 负载需求 自动调整 输出功率,在 轻载或空载 时降低 运行频率 或 进入休眠状态,进一步降低能耗。

Energy monitoring and optimization
能量监测与优化

The built-in energy meter can monitor the input/output power, energy consumption and power factor in real time, and support integration with the energy management system (EMS) to optimize the energy usage efficiency of the factory.
通过 内置能量计 实时监测 输入/输出功率、能耗、功率因数,支持 与能源管理系统(EMS)集成,优化 工厂能源使用效率。

3. Strong communication and integration capabilities
3. 强大通信与集成能力

Industrial Ethernet communication
工业以太网通信

It supports protocols such as EtherCAT, PROFINET, EtherNet/IP, and Modbus-TCP, and can be seamlessly integrated with devices like PLC, SCADA, and HMI to achieve distributed control and remote monitoring.
支持 EtherCAT、PROFINET、EtherNet/IP、Modbus-TCP 等协议,可与 PLC、SCADA、HMI 等设备无缝集成,实现 分布式控制 和 远程监控。

Fieldbus communication
现场总线通信

It is equipped with CANopen, DeviceNet and Modbus-RTU interfaces as standard, supporting direct communication with sensors and actuators and reducing the use of I/O modules.
标配 CANopen、DeviceNet、Modbus-RTU 接口,支持 与传感器、执行器 的直接通信,减少 I/O模块 的使用。

Wireless communication (optional)
无线通信(可选)

Remote debugging, fault diagnosis and parameter update can be achieved through Wi-Fi or 4G modules, which is suitable for remote areas or mobile devices (such as wind farms and mine cars).
通过 Wi-Fi或4G模块 实现 远程调试、故障诊断、参数更新,适用于 偏远地区或移动设备(如 风电场、矿车)。

4. Safety and reliability design
4. 安全与可靠性设计

Functional Safety (SIL 2/PL d
功能安全(SIL 2/PL d)

Compliant with IEC 61508 and IEC 62061 standards, it integrates functions such as Safe Torque shut-off (STO), Safe Stop 1 (SS1), and safe speed limit (SLS) to ensure the safety of personnel and equipment.
符合 IEC 61508、IEC 62061标准,集成 安全转矩关闭(STO)、安全停止1(SS1)、安全限速(SLS) 等功能,确保 人员和设备安全。

Redundant design
冗余设计

Supports power redundancy (dual power inputs) and communication redundancy (dual Ethernet ports), enhancing system availability and being suitable for critical process control (such as in chemical and power industries).
支持 电源冗余(双电源输入) 和 通信冗余(双以太网端口),提高 系统可用性,适用于 关键工艺控制(如 化工、电力)。

Environmental adaptability
环境适应性

The operating temperature range is -20°C to +60°C (high-temperature version is optional), with protection grades of IP55 (control unit) and IP66 (power unit), suitable for harsh industrial environments (such as metallurgy and cement).
工作温度范围 -20°C~+60°C(可选 高温版),防护等级 IP55(控制单元)、IP66(功率单元),适应 恶劣工业环境(如 冶金、水泥)。

5. Intelligent maintenance and diagnosis
5. 智能化维护与诊断

Predictive maintenance
预测性维护

The status of the motor and the frequency converter is monitored through vibration sensors and temperature sensors. Combined with the ABB Ability™ Edge Analytics platform to analyze the fault trend, potential faults are warned in advance.
通过 振动传感器、温度传感器 监测 电机和变频器状态,结合 ABB Ability™ Edge Analytics 平台分析 故障趋势,提前预警 潜在故障。

Remote service
远程服务

Supports ABB Remote Service, enabling remote parameter adjustment, firmware upgrade and fault reproduction through a secure VPN connection, thereby reducing on-site downtime.
支持 ABB Remote Service,通过 安全VPN连接 实现 远程参数调整、固件升级、故障复现,减少 现场停机时间。

Mobile application
移动应用

The status of the frequency converter, energy consumption data and fault records can be viewed on the smart phone or tablet through ABB Drive Apps, facilitating the rapid response of on-site operation and maintenance personnel.
通过 ABB Drive Apps 在 智能手机或平板 上查看 变频器状态、能耗数据、故障记录,方便 现场运维人员 快速响应。

Ii. Technical Parameters
二、技术参数

Detailed specifications of parameter categories
参数类别 详细规格

Applicable motor types: asynchronous motor (IM), permanent magnet synchronous motor (PMSM), synchronous reluctance motor (SynRM)
适用电机类型 异步电机(IM)、永磁同步电机(PMSM)、同步磁阻电机(SynRM)

Power range: 0.75kW to 2MW (depending on the model, such as REX521-01-07N4 to REX521-04-2000G
功率范围 0.75kW~2MW(依型号,如REX521-01-07N4~REX521-04-2000G)

Input voltage: Three-phase 380V to 480V AC (±10%), frequency: 50/60Hz ±5%
输入电压 三相 380V~480V AC(±10%),频率 50/60Hz ±5%

Output characteristics: Output frequency: 0Hz to 550Hz, Overload capacity: 150%, rated current (lasting for 1 minute)
输出特性 输出频率 0Hz~550Hz,过载能力 150%额定电流(持续1分钟)

The speed control resolution is 0.001Hz, and the torque control is 0.1% of the rated torque
控制分辨率 速度控制 0.001Hz,转矩控制 0.1%额定转矩

Encoder feedback supports incremental encoders (2500ppr to 10000ppr) and absolute encoders (17bit to 23bit).
编码器反馈 支持 增量式编码器(2500ppr~10000ppr)、绝对式编码器(17bit~23bit)

The communication interface is standard-equipped with EtherCAT, PROFINET, CANopen and Modbus-RTU, and 4G/Wi-Fi modules are optional
通信接口 标配 EtherCAT、PROFINET、CANopen、Modbus-RTU,可选 4G/Wi-Fi模块

Safety features: STO, SS1, SLS (SIL 2/PL d certification)
安全功能 STO、SS1、SLS(SIL 2/PL d认证)

Environmental adaptability: Operating temperature -20°C to +60°C (storage temperature: -40°C to +70°C), humidity 5% to 95% RH (no condensation)
环境适应性 工作温度 -20°C~+60°C(存储温度:-40°C~+70°C),湿度 5%~95% RH(无凝结)

Protection grade: IP55 (control unit), IP66 (power unit)
防护等级 IP55(控制单元)、IP66(功率单元)

The mechanical dimensions range from 150mm to 600mm in width (depending on the power level), from 400mm to 800mm in height, and from 300mm to 500mm in depth
机械尺寸 宽度 150mm~600mm(依功率等级),高度 400mm~800mm,深度 300mm~500mm

Weight: approximately 10kg to 200kg (depending on the model)
重量 约 10kg~200kg(依型号)

Certification standards: CE, UL, cUL, RoHS, ATEX (explosion-proof certification, optional)
认证标准 CE、UL、cUL、RoHS、ATEX(防爆认证,可选)

Iii. Typical Application Scenarios
三、典型应用场景

1. Industrial Automation and Process Control
1. 工业自动化与过程控制

Fan and pump control
风机与泵控制

Precise control of flow and pressure is achieved through variable frequency speed regulation, with an energy-saving rate of ≥30%. It is suitable for scenarios such as HVAC, water treatment, and chemical engineering.
通过 变频调速 实现 流量、压力的精确控制,节能率 ≥30%,适用于 HVAC、水处理、化工 等场景。

Support multi-pump collaborative control (such as constant pressure water supply systems), and coordinate the start and stop of the master pump and the standby pump through master-slave control to ensure system reliability.
支持 多泵协同控制(如 恒压供水系统),通过 主从控制 协调 主泵和备用泵 的启停,确保 系统可靠性。

Conveyor belts and material handling
传送带与物料搬运

Drive long-distance and heavy-load conveyor belts, achieve smooth start and stop and anti-slip through vector control, and support multi-speed control (such as acceleration, deceleration, and constant speed).
驱动 长距离、重载传送带,通过 矢量控制 实现 平滑启停、防打滑,支持 多段速控制(如 加速、减速、匀速)。

The integrated electronic CAM function enables precise synchronization between the conveyor belt and the manipulator, making it suitable for automated assembly lines.
集成 电子凸轮功能,实现 传送带与机械手的精确同步,适用于 自动化装配线。

2. Energy and Infrastructure
2. 能源与基础设施

Renewable energy power generation
可再生能源发电

In wind farms, yaw motors and pitch motors are driven, and the precise alignment of wind turbine blades is achieved through high-precision position control, thereby enhancing power generation efficiency.
在 风电场 中,驱动 偏航电机和变桨电机,通过 高精度位置控制 实现 风机叶片的精确对准,提高 发电效率。

In photovoltaic power stations, the tracking bracket motor is controlled, and the Angle of the photovoltaic panels is optimized through the solar trajectory algorithm to enhance the utilization rate of light.
在 光伏电站 中,控制 跟踪支架电机,通过 太阳轨迹算法 优化 光伏板角度,提升 光照利用率。

Smart Cities and Architecture
智慧城市与建筑

Drive the fan of the central air conditioning cooling tower, reduce energy consumption and noise through variable frequency speed regulation, support integration with the BMS system, and achieve intelligent building management.
驱动 中央空调冷却塔风机,通过 变频调速 降低 能耗和噪音,支持 与BMS系统集成,实现 智能楼宇管理。

Control urban water supply pumping stations, ensure the stability of pipe network pressure through pressure feedback control, and reduce the damage to pipelines caused by water hammer effect.
控制 城市供水泵站,通过 压力反馈控制 确保 管网压力稳定,减少 水锤效应 对管道的损坏。

3. High-end equipment manufacturing
3. 高端装备制造

CNC machine tools and robots
数控机床与机器人

As a spindle driver for CNC machine tools, it achieves high-precision rotation of the spindle (with a speed of ≥20,000rpm) through high-speed vector control, and supports complex processes such as rigid tapping and milling.
作为 数控机床主轴驱动器,通过 高速矢量控制 实现 主轴的高精度旋转(转速 ≥20,000rpm),支持 刚性攻丝、铣削 等复杂工艺。

In industrial robots, drive joint motors achieve precise movement of the robot through multi-axis collaborative control (with a repeat positioning accuracy of ±0.05mm), and are suitable for scenarios such as welding, spraying, and assembly.
在 工业机器人 中,驱动 关节电机,通过 多轴协同控制 实现 机器人的精确运动(重复定位精度 ±0.05mm),适用于 焊接、喷涂、装配 等场景。

Metallurgical and mining equipment
冶金与矿山设备

Drive the main motor of the rolling mill, coordinate the synchronous operation of multiple rolling mills through master-slave control, ensure uniform sheet thickness, and reduce the scrap rate.
驱动 轧机主电机,通过 主从控制 协调 多台轧机的同步运行,确保 板材厚度均匀,减少 废品率。

Control the mine hoist, achieve heavy-load control of lifting and lowering through four-quadrant operation, support energy feedback, and reduce operating costs.
控制 矿井提升机,通过 四象限运行 实现 提升和下放的重载控制,支持 能量回馈,降低 运营成本

 

 

其他型号推荐:

ABB CI854AK01 3BSE030220R1

ABB 3BHE039770R0102 PPD539A102

ABB 3BHB030310R0001 5SHY4045L0006

ABB 3BHE046836R0101 GFD563A101

ABB 3BHE050077R0102 UNS0881b-PV2

ABB DKTFM418B 3BHB015651P0001

ABB 3BHE023784R2530 PPD113B01-25-111000