5136-RE-VME SST系统备件

5136-RE-VME-SST系统备件
在很多场合,单靠单机的控制是无法设备的顺畅运行,而通过设备与设备的信息交流达到我们想要的效果。比如在前包装和后工序的检测,我们就要将包装的信息反馈到检测处,而检测处的信息也要反馈到包装来。这样通讨信息共享来使得两者之间链接起来,形成一个共体,从而使的两者间的配合更加的紧密,在彼此间达到映影相挥的效果。

分类:
  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层

描述

5136-RE-VME SST系统备件

5136-RE-VME-SST系统备件
在很多场合,单靠单机的控制是无法设备的顺畅运行,而通过设备与设备的信息交流达到我们想要的效果。比如在前包装和后工序的检测,我们就要将包装的信息反馈到检测处,而检测处的信息也要反馈到包装来。这样通讨信息共享来使得两者之间链接起来,形成一个共体,从而使的两者间的配合更加的紧密,在彼此间达到映影相挥的效果。
PLC的通信已经愈来愈体现它的价值,在PLC与PLC之间的通信,能够通过信息的沟通和数据的共享来设备之间的相互协调,已达到互补的效果。PLC之间的数据转换采用RS232接口来传送数据,而RS232接口只能10米的传输距离,如果在1000米的距离内我们可以通过RS485来进行通信,更长的距离只能通过MODEL来进行传输。
PLC的数据传送只是将内部的数据传送到对方的一块连续的地址中,我们把它称为一个表,对方的PLC通过读取表中的数据来进行操作。如果表中的数据是一个一般设置的数据的话,那只是一般的数据传送,比如今天的油价上升了,我要把油价的价格传送到所有的输油机上,那就是数的共享,而当表中的数据是一段控制PLC的指令程序,那就很有难度了,比如你要控制一台机器人来按你想象的动作工作,你会给它编制一段程序并以数据的形式发送过去。

5136-RE-VME SST系统备件

5136-RE-VME-SST system spare parts
In many cases, the smooth operation of the equipment cannot be achieved by relying on the control of a single machine, and the information exchange between the equipment and the equipment can achieve the effect we want. For example, in the pre-packaging and post-process detection, we must feedback the information of the packaging to the detection, and the information of the detection should also be fed back to the packaging. In this way, information sharing is discussed to link up the two and form a common body, so that the cooperation between the two is more close and the effect of mirroring each other is achieved.
PLC communication has increasingly reflected its value, the communication between PLC and PLC, through the communication of information and data sharing to the mutual coordination between the equipment, has reached the complementary effect. The data conversion between the PLC uses the RS232 interface to transmit data, and the RS232 interface can only have a transmission distance of 10 meters, if we can communicate through RS485 within a distance of 1000 meters, the longer distance can only be transmitted through the MODEL.
PLC data transmission is only to transfer the internal data to the other party’s a continuous address, we call it a table, the other party’s PLC by reading the data in the table to operate. If the data in the table is a general set of data, it is just a general data transmission, such as today’s oil price has risen, I want to send the price of oil to all the oil transmission machines, that is the number of sharing, and when the data in the table is a control PLC command program, it is very difficult, such as you want to control a robot to work according to your imagination. You would program it and send it as data.

  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层