GE、IS215UCCCM04A – VME 控制器卡、 数字量输入模块

 

 

 

 

IS215UCCCM04A 是VME 控制器卡，是 GE Speedtronic Mark VIe 燃气轮机控制系统的一部分。IS215UCCCM04A 是一个模块组件，包括 IS215UCCC H4、128 MB 闪存、256MB DRAM 和 IS200 EPMC 子板。有时称为 CPCI 3U 紧凑型 PCI。该面板包括六个以太网类型端口。每个端口都标有其预期用途。面板上还有几个 LED。面板底部有一个小重置按钮。

电路板背面的公端子和面板两端的两个大扣子固定卡。该板采用各种类型的电容器来存储能量以供电路板稍后使用。

如果卡需要清除未使用的能量，电路板会将能量路由到其电阻器。该板附带一张 128 兆位 (128 MB) SD 卡。该卡带有自己的盒子，可以将其滑入其中。

控制器中有许多微芯片。控制整个电路板的数据和条件存储在微芯片上。集成电路可以被认为是电路板的大脑。

板上使用了一个带有狭缝的巨大黑色元件。该部件有助于电路板的冷却。板上包含多个干扰抑制器。这些抑制器会抑制外部电源，例如收音机、手机和其他类似设备。

此卡的电源要求如下

+5 V DC（+5%、-3%、4.5A（典型值）最大 6.75）

+3.3 V DC（+5%、-3%、1.5A（典型）2.0 最大）

+12V 直流（+5%、-3%、最大 50mA）

规格

零件编号：IS215UCCCM04A
制造商：通用电气
产品类型：VME 控制器
系列：Mark VIe

 

 

IS215UCCCM04A is a VME controller card that is part of the GE Speedtronic Mark VIe gas turbine control system.

IS215UCCCM04A is a modular component that includes IS215UCCC H4, 128 MB flash memory, 256MB DRAM, and IS200 EPMC daughter board. Sometimes referred to as CPCI 3U Compact PCI. This panel includes six Ethernet type ports. Each port is labeled with its intended use. There are still several LEDs on the panel. There is a small reset button at the bottom of the panel.
The male terminals on the back of the circuit board and the two large buttons at both ends of the panel are fixed with clips. This board uses various types of capacitors to store energy for later use by the circuit board.
If the card needs to clear unused energy, the circuit board will route the energy to its resistors. The board comes with a 128 megabit (128 MB) SD card. The card comes with its own box, which can be slid into.
There are many microchips in the controller. The data and conditions that control the entire circuit board are stored on the microchip. Integrated circuits can be considered as the brain of circuit boards.
A huge black component with a slit is used on the board. This component helps to cool the circuit board. The board contains multiple interference suppressors. These suppressors will suppress external power sources, such as radios, mobile phones, and other similar devices.
The power requirements for this card are as follows
+5 V DC (+5%, -3%, 4.5A (typical value) maximum 6.75)
+3.3 V DC (+5%, -3%, 1.5A (typical) 2.0 maximum)
+12V DC (+5%, -3%, maximum 50mA)
Specifications
Part number: IS215UCCCM04A
Manufacturer: General Electric
Product type: VME controller
Series: Mark VIe